bag
New Member
Posts: 6
|
Post by bag on Apr 10, 2019 16:36:18 GMT -5
Folks,
Need to downsize
I have a couple of old stable wildwater kayaks that I used to use on the Kenduskeag, but whose bottoms make rock scraping a little marginal, and they should go to people who could use them to keep them out of the landfill ... for now.
Both date from the mid 70s when we were building light glass.
The Phantom Sprint is pretty V bottomed with the hull straight out to the wings. Pretty manuverable. Bottom has a bunch of patches, and really should get some patch removal and a layer of glass to go on a scratchy river, but it works fine on flat water. I built in when living in Philly. State of the art at the time. This boat is kind of fun on the river.
The other is a Phoenix Match which may have been commercially built. It got a seam blown out on the Savage and I got it for low money and fixed it. A somewhat more modern shape with hollows going up to the wings. Not as many bottom patches. A faster shape.
Both are around 30 pounds; we used to build light even though we didn't have today's materials
Both are set up for a 30-31 inch inseam with solid braces.
Collecting dust right now, good boats for training or as a prelim for more advanced.
I also have a goretex kokatat dry top medium I think that needs neck and wrist gaskets which I'd let go for a hundred bucks.
|
|
|
Post by fred on Apr 10, 2019 18:49:18 GMT -5
Hi Ben: I'll bet you get some takers on these, but if you don't, let me know. Thanks, Fred
|
|
jay
New Member
Posts: 29
|
Post by jay on Apr 11, 2019 20:12:45 GMT -5
I'd be interested in the Phoenix, where/when is a good pickup spot?
|
|
bag
New Member
Posts: 6
|
Post by bag on Apr 12, 2019 12:57:02 GMT -5
I'd be interested in the Phoenix, where/when is a good pickup spot? Jay, I'm down in Cushing, do the run to MDI reasonably frequently.
Ben
|
|
bag
New Member
Posts: 6
|
Post by bag on Apr 12, 2019 12:57:32 GMT -5
I'd be interested in the Phoenix, where/when is a good pickup spot? Jay, I'm down in Cushing, do the run to MDI reasonably frequently.
Ben
|
|
jay
New Member
Posts: 29
|
Post by jay on Apr 12, 2019 18:47:18 GMT -5
Thanks Ben
|
|
ailij
New Member
Posts: 13
|
Post by ailij on May 8, 2019 19:48:32 GMT -5
Can't wait to see that Phoenix Jay!
|
|
bag
New Member
Posts: 6
|
Post by bag on May 23, 2019 17:29:09 GMT -5
Sent a note yesterday via PM about doing a drop off in Brunswick on the 31st; havent' been down that way for a while. If that works let me know otherwise a plan B?
|
|